Tajima TMM embroidery machine with USB reader, Howto

How to load the designs from a USB reader on a Tajima TMM embroidery machine:

Make sure the USB Reader is ready. Make sure the color change is already set because you cannot set automatic color change colors after the tape is loaded.

To set the color change, please press to color change button on the CPU, then press RTRN.








Then start pressing the needle number that you want your colors to be on. 1, 2, 3, 4, etc...









When you have all the colors, press RTRN twice. Then continue with the transfer of the design in the next step.









1.Make sure the USB Reader screen says READY and your design is selected.

2.Press [READ] [TAPE] [RUN] . It will read the design from the USB Memory while the machine is sewing.

I have two Tajima multihead machines, two Barudan multihead machines and two Brother machines...Can I install a USB drive to these?

The machines I have are Tajima TME DC1212, Tajima TME DC918, Barudan BEMSE YS 12T, Barudan BESR UG 12T, Brother BAS 416 and Brother BAS 423.

Yes, of course you can.

If you order the drives, you would have to order each one for each machine and specify what machine they are going into so we can get the correct connector for each one.

If you purchase 5 of the USB floppy drive upgrades for the machines that have disk drives in their control panel, I will give you a price of $1,125.

For the Barudan without disk drive you will need to buy a different device. I could sell you one of these devices and the 5 floppy drive upgrades for a total of $1,600 and I will take care of shipping. This will cover all 6 of your machines.

For all the machines except the Brothers you can purchase the following device: http://www.tewh.com/usb.php

The cheapest route you could go would be to buy 2 disk drives at regular price for the Brothers ($550 total), and one of the devices listed at $600. You will then need to buy 3 separate keys which we will sell at $75 each. However, we do not warranty the device when it is used on multiple machines. So your total would be $1375 like this. I will give you another $75 off if you go that route.


My recommendations of course is the $1600 option that will upgrade all machines.

More information: ventas@tewh.com | 619-819-2911

Can you load desings to a Toyota machine via USB External Drive?

YES, you can load designs to a Toyota Embroidery Machine via USB
Instructions to load a file from the USB Reader

1. Plug in the 9-pin communication cable (female-to-female) to the 9-pin port on back of the Toyota embroidery machine.


If you have Toyota 820/830, this port will be 25-pins.



2. Plug other end of the communication cable to the USB.
3. Make sure everything is plug in on the USB and in the machine before you turn in on.


4. Start the USB and the machine at the same time.



5. Insert the USB stick on the USB reader, wait until It says READY.


6. On the Toyota embroidery machine. Go to the [EMB Start] menu, if it is not already there.














7. Press [DATA] button. It should be at the design menu now. Highlight [Input Design] and press [SET].






8. The screen now says [INPUT THRU PC]. The number defaults to [00].







9. Change the number to [01] by using the keypad, and press [SET].

(Or whatever number on you design.)





10. The [DATA] light should blink green as it downloads. It will beep when completed the download.